FX Stage 2 Clutch Kit & Aluminum Flywheel 9-2X Baja Forester Impreza Legacy 2.5L

FX Racing Stage 2 clutch kit is a step up from our Stage 1 clutch kit. This is a versatile set up for the street and on the track. It provides a smooth engagement yet it can holds 50%+ more power over stock clutches. This is a direct factory replacement clutch kit thus no modifications are needed and the clutch kit includes only the highest grade components from world's leading high performance clutch manufacturer. The Carbonized kevlar friction material is used on all Stage 2 clutch kit to have higher burst strength and heat tolerance. The heavy-duty sprung center with heat treated springs and retainer rivets to increase strength and reliability. The FX Racing pressure plate features special single diaphragm design to increase clamp load. It features induction hardened diaphragm, CNC machined castings, stronger drive straps and rivets. FX Racing pressure plate provides smooth and precise feel with easy modulation. All FX Racing pressure plate is load tested on a special testing tool for quality assurance.

This complete clutch kit includes:

• FX Racing Stage 2 Heavy-Duty Pressure Plate
• FX Racing Stage 2 Carbon Kevlar Disc (225mm, 24 spline)
• Release Bearing
• Pilot Bearing
• Alignment Tool
• Installation Guide

Horsepower Rating: 287 HP / Torque Capacity: 280 ft/lbs

FX RACING ALUMINUM Flywheels are made using the highest quality, most modern materials available. The flywheel itself is made from 6061 T6 billet aluminum. It is CNC machined at a constant surface speed for durability and finish. The friction surface is made from high carbon alloy steel. It is incredibly durable allowing the user to use just about any clutch disc material available from organic to Kevlar and even sintered iron. The friction plate can be machined or replaced as needed. The mass at the center of the flywheel is retained for strength, but the mass at the outside is eliminated for optimum performance.

• Ultra light and weighs only 9.0 lbs
• Meets or exceeds SFI 1.1 specification
• Course ground surface to maintain coefficient of friction
• Stepped pin to maintain plate balance and placement
• Tig-welded safety tab to eliminate ring gear separation
• Heilicoil bolt holes to insure proper torque value and eliminate thread damage
• Flywheel comes with the clutch pilot bearing installed

Vehicle Application

2005 - 2005 Saab 9-2X Linear (2.5L SOHC 4cyl Non-Turbo)
2003 - 2006 Subaru Baja (2.5L SOHC 4cyl Non-Turbo)
1999 - 2006 Subaru Forester (2.5L SOHC 4cyl Non-Turbo)
1999 - 2007 Subaru Impreza; Impreza Outback (2.5L SOHC 4cyl Non-Turbo)
2000 - 2006 Subaru Legacy; Legacy Outback (2.5L SOHC 4cyl Non-Turbo)