FX Racing Stage 4 Clutch Kit & Fidanza Flywheel BMW 323 325 328 330 525 528 530 Z3

FX Racing Stage 4 clutch kit is a direct factory replacement clutch kit and it's designed for those who seek the ultimate in clutch performance and reliability. FX Racing clutch kit includes only the highest grade clutch components from the world's leading racing clutch manufacturers. The 6-puck copper ceramic (also known as MIBA) disc features 12 high-coefficient friction pads that are resistant to slippage and ensures long lasting life. The heavy-duty solid spline center unit boasts heat treated chromoly for the maximum power and durability. The FX Racing pressure plate features special single diaphragm design to increase clamp load. It features induction hardened diaphragm, CNC machined castings, stronger drive straps and rivets. FX Racing pressure plate provides smooth and precise feel with easy modulation. All FX Racing pressure plate is load tested on a special testing tool for quality assurance.

This complete clutch kit includes:

• ** Sachs/Self-Adjusting Style that fits original DMF **
• FX Racing Stage 4 Self-Adjusting Pressure Plate
• FX Racing 6-Puck Copper Ceramic Rigid Disc (240mm, 10 spline)
• Release Bearing
• Pilot Bearing
• 2 pc. Alignment Tool
• Installation Guide

Horsepower Rating: 498 HP / Torque Capacity: 452 ft/lbs

Fidanza Aluminum Flywheels are made using the highest quality, most modern materials available. The flywheel itself is made from 6061 T6 billet aluminum. It is CNC machined at a constant surface speed for durability and finish. The friction surface is very special. Fidanza uses a 1050 high carbon, alloy steel. It is incredibly durable, allowing the user to use just about any clutch disc material available. The friction plate can be machined or replaced as needed. The plates are secured with 16-20 hardened aircraft quality screws with self locking nuts which prevent any warping. Fidanza uses hardened ring gears that are swarted to the flywheel with button head screws that are counter board between the flywheel and ring gear to prevent any possible slippage. The mass at the center of the flywheel is retained for strength, but the mass at the outside is eliminated for optimum performance.

• Ultra light aluminum flywheel and weighs only 13 lbs. (Stock flywheel weighs 24 lbs.)
• SFI approved 2 part design with replaceable clutch contact plate delivers the highest quality and longest service life of any flywheel available.
• Fidanza flywheels work with every clutch including Exedy, ACT, Fidanza, Clutchmasters, and other OEM clutch kits
• Fidanza Part number: 195461
• Made in the U.S.A.

Note: The clutch kit and flywheel must be used together as a conversion kit

Vehicle Application

1999 - 2000 BMW 323i 4 door sedan (E46, 2.5L 6cyl)
2000 - 2000 BMW 323ci 2 door coupe (E46, 2.5L 6cyl)
2001 - 2003 BMW 325i 4 door sedan (E46, 2.5L 6cyl)
2001 - 2003 BMW 325ci 2 door coupe (E46, 2.5L 6cyl)
2001 - 2003 BMW 325xi 4WD 4 door sedan (E46, 2.5L 6cyl)
1999 - 2000 BMW 328i 4 door sedan (E46, 2.8L 6cyl)
2000 - 2000 BMW 328ci 2 door coupe (E46, 2.8L 6cyl)
2001 - March/2003 BMW 330i 4 door sedan (E46, 3.0L 6cyl; fits 5 speed only)
2001 - March/2003 BMW 330ci 2 door coupe (E46, 3.0L 6cyl; fits 5 speed only)
2001 - 2002 BMW 525i (E39, 2.5L 6cyl)
1999 - 2000 BMW 528i (E39, 2.8L 6cyl)
2001 - March/2003 BMW 530i (E39, 3.0L 6cyl; fits 5 speed only)
1999 - 2002 BMW Z3 (E36, 2.5L DOHC 6cyl)
2001 - 2002 BMW Z3 (E36, 3.0L DOHC 6cyl)