FX Racing Stage 4 Clutch Kit and Aluminum Flywheel 323 325 328 I IS 525i 528i M3 Z3

FX Racing Stage 4 clutches are designed for the individual whose goal is to have an ultimate strip/track clutch system. FX Racing Stage 4 clutches only consist of the very best materials available. The pressure plate is made from the forged ductile iron (3X stronger than the conventional cast iron pressure plate) to ensure consistent clamping force and the extra long life. The disc has virtually indestructible 6-puck solid type where it provides precise and direct clutch engagement. The 6-puck copper ceramic (also known as 'MIBA') disc features high-coefficient friction pads that are resistant to slippage and burst. The FX Racing pressure plate features special single diaphragm design to increase clamp load. It features induction hardened diaphragm, CNC machined castings, stronger drive straps and rivets. FX Racing pressure plate provides smooth and precise feel with easy modulation. All FX Racing pressure plate is load tested on a special testing tool for quality assurance.

FX Racing Aluminum Flywheels are made using the highest quality, most modern materials available. The flywheel itself is made from 6061 T6 billet aluminum. It is CNC machined at a constant surface speed for durability and finish. The friction surface is made from high carbon alloy steel. It is incredibly durable allowing the user to use just about any clutch disc material available from organic to Kevlar and even sintered iron. The friction plate can be machined or replaced as needed. The mass at the center of the flywheel is retained for strength, but the mass at the outside is eliminated for optimum performance. ul>

• Ultra light and weighs only 10.6 lbs (stock flywheel weighs 25 lbs)
• Flywheel comes with 8 flywheel mounting bolts.
• Meets or exceeds SFI 1.1 specification. Design with replaceable plate delivers the highest quality and longest service life of any flywheel available
• A: Aircraft grade 8 quality friction surface bolts
• B: Course ground surface to maintain coefficient of friction
• C: Stepped pin to maintain plate balance and placement
• D: Tig-welded safety tab to eliminate ring gear separation
• E: Heilicoil bolt holes to insure proper torque value and eliminate thread damage
• ***NOTE: Replacement of stock dual mass flywheel may cause added gear noise***

This complete clutch kit and flywheel package includes:
• FX Racing Lightweight Aluminum Racing Flywheel
• FX Racing Heavy-Duty Pressure Plate
• FX Racing Copper Ceramic 6-puck Rigid Disc (9-1/2", 10 spline)
• Release Bearing
• Pilot Bearing
• Alignment Tool
• Installation Guide

Vehicle Application:
1998 - 1999 BMW 323i convertible 2 door (E36, 2.5L 6cyl)
1998 - 1999 BMW 323is 2 door coupe (E36, 2.5L 6cyl)
1992 - 1995 BMW 325i; 325is (E36, 2.5L M50)
1994 - 1995 BMW 325i convertible (E36, 2.5L M50)
1996 - 1998 BMW 328i 4door sedan (E36, 2.8L DOHC 6cyl)
1996 - 1999 BMW 328is; 328i convertible (E36, 2.8L DOHC 6cyl)
1991 - 1995 BMW 525i (E34, 2.5L M50)
1997 - 1998 BMW 528i (E39, 2.8L M52)
1995 - 1999 BMW M3 (E36, 3.0L S50; 3.2L S52)
1998 - 2002 BMW Z3 M Coupe; Z3 M Roadster (E36, 3.2L S52)